Start-Up
Axiostar plus Attaching epi-fluorescence illuminator Carl Zeiss
B 40-815 e 12/01 2-23
2.11.1 Filter stop carrier for epi-fluorescence illuminator
The epi-fluorescence illuminator has two slots for filter stop carriers. The carriers can be inserted and
accessed from the right or left.
Filter stop carrier 1 (designated with one dot) has three positions (a, b, c) for filters with a 25 mm
diameter. O-rings are used to hold the filters in the stop carrier.
Filter stop carrier 2 (designated with two dots) also has three positions. Position 1 (adjust) is used to
adjust the fluorescent lamp (see section 2.11.4). Position 2 (open) is a free passage, but a 25 mm
diameter filter can be used. Position 3 (closed) is the locking position for the fluorescent lamp.
• When inserting the filter stop carrier, make sure that the markings on the top and right side of
the carrier match the markings and the epi-fluorescence illuminator.
1 Filter stop carrier 1
2 Filter stop carrier 2
3 Epi-fluorescence illuminator
Fig. 2-21 Filter stop carrier
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
To Next Page