8
EN
Item Item How To LED Indicator
Hub 2000
Power ups
Connect PV or AB1000 or AB2000
or SuperBase V or Satellite
Battery
Hub 2000 indicator lits green
Power outage
Disonnect PV or AB1000 or
AB2000 or SuperBase V or
Satellite Battery.
All indicators not be lit
start IoT Connection After Hub 2000 Power ups IoT indicator ashes green slowly
IoT Connecting After Hub 2000 power ups IoT indicators ashes green
Finishing IoT Connection / IoT indicator lits green
Reset IoT Connection
Press and hold IoT button for 3
seconds
IoT indicators ashes green
Turn off IoT
Press and hold the IoT button 1
seconds
IoT indicators not be lit
Turn on IoT
Press and hold the IoT button 1
seconds
IoT indicators ashes green
overvoltage reminding
/ overcurrent reminding /
short circuit reminding /
error reminding
Please stop using immediately,
check the detailed error
information in Zendure APP, and
contact customer service
Hub 2000 Indicator ashes red
AB1000or
AB2000 or
SuperBase
V or Satellite
Battery
AB1000 or AB2000
connection
After Hub 2000 Power ups
AB1000 or AB2000 indicator
ashes green for 2s and then
stays lit green
AB1000 or AB2000 or
SuperBase V or Satellite
Battery recharging
/
1) AB1000 or AB2000 Indicator
ashes green.
2) SuperBase V will display Input
Power on the Screen.
3) Satellite Battery's Power Button
will ash.
AB1000 or AB2000 or
SuperBase V or Satellite
Battery battery left
capacity
Display on Zendure
App,Download the Zendure App
and bind Solar Flow. SuperBase
V and Satellite Batteries will also
appear on the Display.
/
low power reminding
Display on Zendure
App,Download the Zendure App
and bind Solar Flow
AB1000 or AB2000: Indicator will
turn red.
SuperBase V or Satellite Battery:
Power Ring or Power Indicator will
ash for 30 seconds when the
State of Charge (SOC) is low (10%
to 20%). Additionally, it will beep 5
times when the SOC drops to 5%.
Low temperature
warning
Waiting the temperature is
normal before using
1) AB1000 or AB2000 indicator
lit red . 2）SuperBase V or
Satellite Battery: Low- or High-
Temperature Warning ashes on
the screen.
high temperature
warning
overvoltage reminding
/ overcurrent reminding /
short circuit reminding /
error reminding
Please stop using immediately,
check the detailed error
information in Zendure APP, and
contact customer service
AB1000 or AB2000: Indicator will
turn red.
SuperBase V: Battery Failure and
Error Code ashes on Display.
Satellite Battery: Status Indicator
will turn on.
Operation Guidelines:
To Next Page
Loading...
General