806834 v1.02 07.21 G5 Online install instructions and user guide
32
SAFETY
INSTALLATION
TROUBLE
SHOOTING
COMMISSION
USER GUIDE
TAP SAFETY
LCD SCREEN
CONTACT
INSTALLATION
GUIDE
Command
Centre
USB
Connect Command Centre to HydroTap.
USB
connection
Tap
Mains power cable
Do not connect to the mains socket until commissioning
Section 4 Commercial & Residential Command Centre installation
2. Pull pipe
out
1. Press collet
down
Insert Remove
2. Push pipe to
end stop
1. Cut pipe
clean & square
John Guest pipe and fittings
Take care to use correctly, see below :
To Next Page
Loading...
