Zip HydroTap G5 BCS - Section 3.7.4 Dispense Times; Section 3.7.5 Light Sensor

806834 v1.02 07.21 G5 Online install instructions and user guide
92
USER GUIDE
SAFETY
INSTALLATION
TROUBLE SHOOTING
COMMISSION
USER GUIDE
TAP SAFETY
LCD SCREEN
CONTACT
INSTALLATION
GUIDE
3.7.4 Dispense times
Dispense times
• Set the “bottle-fill” dispense time for each
water type.
• Minimum dispense time: 5 seconds.
• Maximum dispense time: 15 seconds
(default).
Light sensor
3.7.5 Light sensor
• Follow the screen instructions to calibrate
the light sensor.
• Ensure the ambient light in the room is
typical for operating conditions.
• The lights on the tap will flash to confirm
calibration.
• When the room is darkened below the
calibrated light level, the tap lights will turn
OFF after 30 seconds.
[ ]
[ ]
[ ]
[ ]
Section 3 Command Centre Screen