806834 v1.02 07.21 G5 Online install instructions and user guide
90
USER GUIDE
SAFETY
INSTALLATION
TROUBLE
SHOOTING
COMMISSION
USER GUIDE
TAP SAFETY
LCD SCREEN
CONTACT
INSTALLATION
GUIDE
3.7.3 CO settings
• After fitting a new CO cylinder , reset the
CO counter.
Purge CO
• Purge the gas lines when fitting a new CO
gas cylinder.
• Press the green start icon.
• The purge runs for 30 seconds.
• Water may be dispensed before CO gas
escapes from the tap.
• Water dispenses, then the CO gas escapes
through the tap.
• The purge process stops automatically.
CO reset
12:12 PMPURGE CO2
INFO
This process removes water from the sparkling chamber
when a new CO2 bottle is installed.
This is an automatic process that will take 30 seconds.
[ ]
[ ]
Section 3 Command Centre Screen
To Next Page
Loading...
