806834 v1.02 07.21 G5 Online install instructions and user guide
89
USER GUIDE
SAFETY
INSTALLATION
TROUBLE
SHOOTING
COMMISSION
USER GUIDE
TAP SAFETY
LCD SCREEN
CONTACT
INSTALLATION
GUIDE
3.7.2 Temperature settings continued
Boiling calibration
• Take care during boiling calibration as hot
steam may vent from the tap spout.
• On start-up, the HydroTap self-calibrates or
go to this menu to recalibrate..
• Calibration will take around 10 minutes.
External booster
• For selected commercial Boiling models,
an external booster is supplied or may be
purchased as an upgrade to increase Boiling
capacity.
[ ]
[ ]
• Ensure the correct selection is made, for
optimum performance.
Section 3 Command Centre Screen
To Next Page
Loading...
