EC16 Elevator Control Panel & DEX16 Elevator Floor Extension Board User Manual
P a g e | 24 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
5 Elevator control operating instructions
Connect to ZKBio CVSecurity Software
The elevator controller needs to be connected to the software and set the corresponding parameters
to use the elevator control function in the software system, and can manage the equipment through
the system, upload the user's elevator control data, download the configuration information and
output various reterminals to realize the digital management of the enterprise.
5.1.1 Login Software
1. Open your browser, enter the server IP address and terminal number (e.g. https://127.0.0.1:8098/)
in the address bar, click Enter to enter the login page.
2. Or double-click the desktop the ZKBio CVSecurity icon to bring up the system login page.
3. For the first time to use this system, default user name admin and password admin, click
[Login]
,
or click [Fingerprint Login] on the interface, then press the administrator finger on the
fingerprint device to enter the system home page.
4. To use this system for the first time, enter the default user name
admin
and password
admin
and
click [
Login
]. Or click the icon of
Other login mode
on the interface, then press admin finger
on the fingerprint device to enter the system home page.
Note:
1. To ensure the safety of using the system, you must change the default password after logging into the
system.
2. For more details, please refer to the ZKBio CVSecurity User Manual.
To Next Page
Loading...
Need help?
General