ZKTeco EC16 User Manual

EC16 Elevator Control Panel & DEX16 Elevator Floor Extension Board User Manual
P a g e | 13 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
3 Terminal Instructions
Figure 3-1 Terminal diagram of the elevator controller and the expansion board
The terminals are described as follows:
No.
Terminal
Number
Description
1
Floor Button
Control Port
16
Used to connect elevator buttons for floor selection control.
2
Extend Port
1
Expansion output for connecting DEX16 expansion board to expand floors.
3
Wiegand
2
Wiegand reader communication terminal. Used to connect Wiegand readers,
etc. And supports line interruption alarm message alerts.
4
RS-485
1
RS-485 reader communication terminal, used to connect RS-485 reader.
5
LED Indicator
1
Equipment operating status indicators, respectively, are power light (POWER),
operating status indicator (RUN) and communication indicator (COMM).
6
Elevator Door
Closing Button
1
Used to connect the door closing button on the elevator operation panel.
7
Elevator Door
Opening Button
1
Used to connect the door opening button on the elevator operation panel.
8
Alarm Output
1
Used to connect with the alarm.
9
Speaker
1
Used to extend the voice announcement function.
10
Voice
1
Used to connect the voice control magic box to realize voice contact-free
elevator ride.

ZKTeco EC16 Specifications

General

Brand	ZKTeco
Model	EC16
Category	Computer Hardware
Language	English