ZKTeco ProFace X Series - Page 38

ProFace X Series User Manual
Page | 37 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Add Wi-Fi Network Manually
Once added, find the added Wi-Fi network in the list and connect to the network by following the same
procedure.
Advanced Options
This interface is used to set the network parameters.
Menu Name Description
DHCP
Dynamic Host Configuration Protocol, which involves allocating dynamic IP
addresses to network clients.
IP Address
IP address of the Wi-Fi network.
Subnet Mask
Subnet mask of the Wi-Fi network.
Gateway
Gateway address of the Wi-Fi network.
Tap on Add Wi-Fi Network to add the Wi-Fi
manually.
On this interface, enter the Wi-Fi network
parameters. (The added network must exist.)