ProFace X Series User Manual
Page | 49 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Server Address
Enter the server address.
Server Port
Enter the server port.
User Name
Enter the Username of server.
Password
Enter the password of server.
realm
Enter the realm of server.
The ProFace X and the indoor station to achieve video intercom there are two modes, respectively, the
LAN and SIP server.
Security Setting
Click Security Setting on the System interface.
Menu Name Description
Security Mode
When enabled, user information verification has a high level of security. This
function can be enabled or disabled via the menu interface. When switching
on and off, there are security prompts. All data will be deleted and the device
will be restarted after confirmation.
Note: After turning on the security mode, the product will forcibly enable the
function of returning to the standby interface when the menu times out by
default (default 60s). It does not support disabling in security mode, but it
does support disabling in non-
security mode. To configure, go to
Personalize > User Interface > Menu Screen Timeout(s).
Standalone
Communication
By default, this function is disabled. This function can be enabled or disabled
via the menu interface. When it is switched on, a security prompt appears, and
the device will restart after you confirm.
To Next Page
Loading...
Need help?
General
