ZKTeco ProFace X Series User Manual

ProFace X Series User Manual
Page | 56 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Bell Schedules
Click Bell Schedules on the Personalize interface.
Add a Bell
1. Click New Bell Schedule to enter the adding interface:
Function Name Description
Bell Status
Set whether to enable the bell status.
Bell Time
At this time of day, the device automatically rings the bell.
Repeat
Set the repetition cycle of the bell.
Ring Tone
Select a ring tone.
Internal Bell Delay(s)
Set the duration of the internal bell. Valid values range from 1 to 999
seconds.
2. Back to the Bell Schedules interface; click All Bell Schedules to view the newly added bell.
Edit a Bell
On the All Bell Schedules interface, tap the bell to be edited.
Click Edit, the editing method is the same as the operations of adding a bell.
Delete a Bell
On the All Bell Schedules interface, tap the bell to be deleted.
Tap Delete and select Yes to delete the bell.

ZKTeco ProFace X Series Specifications

General

Brand	ZKTeco
Model	ProFace X Series
Category	IP Access Controllers
Language	English