ProFace X Series User Manual
Page | 65 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Note:
When the ending time is earlier than the starting time, such as 23:57~23:56, it indicates that access is
prohibited all day; when the ending time is later than the starting time, such as 00:00~23:59, it
indicates that the interval is valid.
The effective time period to unlock the door: open all day (00:00~23:59) or when the ending time is
later than the starting time, such as 08:00~23:59.
The default time zone 1 indicates that door is open all day long.
Holiday Settings
Whenever there is a holiday, you may need a special access time; but changing everyone's access time
one by one is extremely cumbersome, so you can set a holiday access time which applies to all the
employees, and the user will be able to open the door during the holidays.
Click Holidays on the Access Control interface.
Add a New Holiday
Click Add Holiday on the Holidays interface and set the holiday parameters.
Edit a Holiday
On the Holidays interface, select a holiday item to be modified. Click Edit to modify holiday parameters.
Delete a Holiday
On the Holidays interface, select a holiday item to be deleted and click Delete. Click OK to confirm the
deletion. After deletion, this holiday is no longer displayed on All Holidays interface.
To Next Page
Loading...
Need help?
General
