ProFace X Series User Manual
Page | 43 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
2. If users need to set date and time manually, disable Date and Time Auto Sync first, and then tap
Manual Time Setting to set date and time and tap Confirm to save.
3. Toggle the button to enable or disable the 24-Hour time format and select the date format.
When restoring the factory settings, the time (24-hour) and date format (YYYY-MM-DD) can be restored,
but the device date and time cannot be restored.
Note: For example, the user sets the time of the device (18:35 on March 15, 2020) to 18:30 on January 1,
2021. After restoring the factory settings, the time of the equipment will change to 18:30 on January 1,
2021.
Access Logs Setting
Click Access Logs Setting on the System interface.
To Next Page
Loading...
