ProFace X Series User Manual
Page | 57 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Punch States Options
Click Punch State Options on the Personalize interface.
Function Name Description
Punch State Mode
Select a punch state mode, which can be:
Off: To disable the punch state key function. The punch state key set under
Shortcut Key Mappings menu will become invalid.
Manual Mode: To switch the punch state key manually, and the punch state
key will disappear after Punch State Timeout.
Auto Mode: After this mode is chosen, set the switching time of punch state
key in Shortcut Key Mappings; when the switching time is reached, the set
punch state key will be switched automatically.
Manual and Auto Mode: Under this mode, the main interface will display
the auto-switching punch state key, meanwhile supports manually switching
punch state key. After the timeout, the manually switching punch state key
will become an auto-switching punch state key.
Manual Fixed Mode: After the punch state key is manually switched, the
punch state key will remain unchanged until being manually switched next
time.
Fixed Mode: Only the fixed punch state key will be shown, and it cannot be
switched.
To Next Page
Loading...
Need help?
General
