ZKTeco ProFace X Series - Wireless Network

ProFace X Series User Manual
Page | 36 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Wireless Network
It is used for network connection, wireless data transmission and communication.
Click Wireless Network on the Comm. Settings interface.
Wi-Fi is enabled in the Device by default. Toggle on button to enable or disable Wi-Fi.
When Wi-Fi is enabled, tap on the required network from the searched network list.
Wi-Fi Enabled:
Tap on the required
network from the searched network list.
Tap on the password field to enter the
password, and then tap on Connect to Wi-Fi
(OK).