ProFace X Series User Manual
Page | 55 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Menu Name Description
Wallpaper
To select the main screen wallpaper according to your personal preference.
Language
To select the language of the device.
Menu Screen
Timeout (s)
When there is no operation, and the time exceeds the set value, the device will
automatically go back to the initial interface. You can disable the function or
set the value between 60 and 99999 seconds.
Idle Time to Slide
Show (s)
When there is no operation, and the time exceeds the set value, a slide show
will be played. It can be disabled, or you may set the value between 3 and 999
seconds.
Slide Show
Interval (s)
This refers to the time interval switching different slide show pictures. The
function c
an be disabled, or you may set the interval between 3 and 999
seconds.
Idle Time to
Sleep (m)
If you have activated the sleep mode, when there is no operation, the device
will enter standby mode. You can disable this function or set a value within 1
to 999 minutes.
Main Screen Style
To select the main screen style according to your personal preference.
Voice Settings
Click Voice on the Personalize interface.
Menu Name Description
Voice Prompt
Select whether to enable voice prompts during operating.
Touch Prompt
Select whether to enable keypad sounds.
Volume
Adjust the volume of the device and the valid value is 0 to 100.
To Next Page
Loading...
Need help?
General
