ProFace X Series User Manual
Page | 83 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Function Description
It is the Answer key, the user can click to answer the current call. After answering, enter the
window during the call, and turn on audio and video by default.
It is the Hang up key. After hanging up, immediately end the current call.
It is the Ignore key, used to ignore the current call. Click it to close the call window, and the
icon in the upper right corner will display the number of pending calls, like this
The user can click the icon in the drop-down menu to open the call window of the
current device again and choose to answer, as shown following figure.
It is the Hang up key, used to hang up the current call.
It is the Snapshot key, used to take a snapshot.
It is the Remote Open key, used to open the door remotely. The default lock drive time is 5
seconds.
Note: If the device preview interface is opened on the ZKBioSecurity software, the call interface will no
longer be displayed in this call window.
To Next Page
Loading...
Need help?
General
