What to do if ZOLL AED 3 Medical Equipment says 'CHANGE BATTERY'?
If your ZOLL Medical Equipment displays a 'CHANGE BATTERY' message, the first step is to replace the battery pack. If the message continues to appear after replacing the battery, remove the AED from service.
Why does my ZOLL Medical Equipment say 'ATTACH CORRECT DEFIB PADS'?
The 'ATTACH CORRECT DEFIB PADS' prompt indicates that incompatible defibrillation pads are connected to the ZOLL AED. Use one of the following pads: * CPR Uni-padz * CPR-D-padz® * CPR Stat-padz * Stat-padz II * Pedi-padz II.
Overview of the AED's main controls and indicators.
Describes the functions of core controls like buttons, speaker, and screen.
Describes functions of pads connector, USB, battery, and handle.
Details the manual's issue date, copyright, and trademarks.
General description of the ZOLL AED 3 defibrillator's purpose and models.
When to use and when not to use the AED.
Specifies target users and explains document conventions.
Key warnings to prevent injury or death during AED use.
Precautions to prevent damage to the AED device.
Lists the items included in the ZOLL AED 3 shipping container.
Instructions for connecting the defibrillation pads to the AED.
Guide for installing the battery pack into the AED.
Steps for preparing and storing the defibrillation pads.
Check indicators to confirm correct battery and pad installation.
Important notes on pad/battery connection and status monitoring.
General steps for using the AED during a rescue.
Instructions for turning the AED on.
Instructions for using the child selection button.
Detailed instructions for placing defibrillation pads on the patient.
Procedures for delivering a shock in different AED models.
Instructions for performing CPR when a shock is not advised.
Steps for starting CPR with AED guidance.
Explains the information shown on the ECG/CPR dashboard.
General information on AED maintenance and self-tests.
Steps to perform after each time the AED is used.
Instructions on how to clean and disinfect the AED.
Step-by-step guide for replacing the AED battery pack.
Details the different self tests performed by the AED.
Explains automatic transfer of self-test data.
Lists common error messages and recommended corrective actions.
Summarizes messages related to exporting patient data.
Contact details and procedures for technical service.
General information on transferring patient data from the AED.
Step-by-step guide for transferring patient files via USB or Wi-Fi.
Describes the functions of RescueNet Code Review software.
Describes the functions of Case Review software.
Lists and explains various symbols found in the manual and on the equipment.
Provides detailed technical specifications for the ZOLL AED 3 defibrillator.
General| Device Type | Automated External Defibrillator (AED) |
|---|---|
| IP Rating | IP55 |
| Waveform | Rectilinear Biphasic |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Display | Color LCD screen |
| CPR Feedback | Real CPR Help with audio and visual feedback |
| Battery Type | Lithium Manganese Dioxide (LiMnO2) |
| Battery Life | 5 years |
| Electrode Pads | CPR Uni-padz |
| Weight | 2.5 kg (5.5 lbs) including battery |
| Dimensions | 23.6 cm x 24.7 cm x 12.7 cm (9.3 in x 9.7 in x 5.0 in) |
| Voice Prompts | Clear voice prompts |
| Connectivity | Wi-Fi |
| Data Recording | Stores ECG data and event summary |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Energy Selection | Automatically selects energy level (150J for adults, 50J for children) |
To Next Page
