This device shall be installed by the personnel authorized by the manufacturer.
Don’t open the device cover. Otherwise there might be risk of electrical shock.
Only the service personnel authorized and trained by the manufacturer can
maintain or update the device.
This device includes software protected by copyright and international laws, all
right reserved to the manufacturer, No part of the device may be modified,
reproduced or transmitted in any form or by any means, without prior written
permission from the manufacturer.
All the analog digital devices connected to this device must be approved by the
designated standard (such as EN 60601-1 Safety of Medical Electrical
Equipment). And all equipment must be connected in accordance with the
valid version of the system standard IEC60601-1-1. The person who is in
charge of connecting the additional devices to the input and output signal ports
shall be responsible for whether the system conforms to the standard
IEC60601-1-1 or not. For any questions, please contact the manufacturer.
When this device and another electrical device are connected into a
conjunction with certain function, if it cannot be determined whether this
conjunction is hazardous (for example, electrical shock caused by leakage
current crowding) or not in terms of each device’s specification, please contact
the manufacturer or related experts in hospitals in order to guarantee that
safety of all devices will not be breached.
To Next Page
Loading...