Zoncare U30 - Report Storage Mode

80
USB (SD card): you can select USB (SD card) only when it is inserted. Reports are stored
in .ECG format and can be viewed from this ECG Machine or dedicated
software workstation.
CAUTION
 Local storage has limited capacity, thus USB (SD card) is recommended to
store the reports.
6.3.2 Report Storage Mode
Configure the report storage mode with options of Manual / Auto.
Auto Storage
In auto recording mode, after each measurement, the system will automatically store the current
report to designated location.
When freezing the ECG waveform, the system will automatically generate the report and store it
in designated location.
CAUTION
 In auto recording mode, the system will store the report only when the
measurement is finished. If it stops recording abnormally, the report will not be
saved.
Manual Storage
When the save mode is set to manual, when the recording ends, the system will pop up the
“Save the ECG file?” dialog box.