74
occurs, please change other types of electrodes.
Automatic measurement and interpretations are for doctors’ reference only,
and cannot be directly used as the basis for clinical treatment.
5.6 Lead-off Handling
When the electrode is loose, or the electrode is not properly connected to the lead wire, or the
ECG cable is loose from the machine side, the lead name on the ECG display will be red.
5.7 Entering Patient Information
Prior to ECG acquisition, you must verify patient information for better report management. On
Waveform Acquisition interface, click key to enter Patient Info interface and fill in
relevant information as required. For details, please refer to Section 4.2.
To Next Page
Loading...