Zoncare U30 - General-FTP Setting

48
(You should ensure that the
network is properly connected
and the
FTP/SAMBA/HTTP/DICOM
transmission mode is
successfully enabled)
Note: The corresponding button
will only be highlighted if the
FTP/SAMBA/HTTP/DICOM
transfer mode is enabled,
otherwise it will be grayed out.
4.2.12 General-FTP Setting
Fig. 4.12 General-FTP Setting
Transfer Setting
Menu Item
Options
Default
Value
Illustration
FTP setting
Enable,
IP address,
port number,
OFF
1) The FTP username and
password that you set must be
the username and password that