Zoom H4essential - Page 91

5. Set whether to record simultaneously with the H4essential.
Use to select “Mode” and press . Then, use to select the mode and press
.
Setting Explanation
Audio I/F + REC The H4essential can record and play back even when it is being used
as an audio interface.
For details about this function, see “Recording on the H4essential
while using it as an audio interface”.
Audio I/F Only The H4essential will not record or play back when it is being used as
an audio interface.
NOTE
• “Audio I/F + REC” can be selected only when the sample rate is set to 44.1 kHz or 48 kHz. (→ Setting the
sample rate)
• All sample rate options can be used when “Audio I/F Only” is selected. The sample rate, which can be set
from the computer, smartphone or tablet, has 44.1 kHz, 48 kHz and 96 kHz options.
6. Select the power supply.
Use to select “Power” and press . Then, use to select the power supply and
press .
Setting Explanation
USB Power will be supplied using USB bus power.
Batteries The batteries in the unit will be used.
91