Zoom R4 MultiTrak - Using send effects; Adjusting the amount of Echo;Reverb; Adjusting Echo;Reverb parameters

Using send effects
The two types of effects that can be used as send effects are Echo and Reverb.
Adjusting the amount of Echo/Reverb
1. Open the track settings and adjust the Echo or Reverb level.
→ Making track settings
Adjusting Echo/Reverb parameters
1. Press to stop recording/playback.
2. Press and hold when the Home Screen is open.
This opens the Option Menu.
3. While pressing , press .
This opens the Settings Menu.
4. Use and to select “Echo/Reverb” and use to confirm.
51