Setting display power saving
In order to prevent power consumption when using batteries, the display backlight can be set to dim when
no operation is conducted for a set amount of time. This is on by default.
1. Press and hold when the Home Screen is open.
This opens the Option Menu.
2. While pressing , press .
This opens the Settings Menu.
3. Use and to select an item, and use to confirm.
Proceed with the following selections.
System > Power Saving
4. Use and to select an item, and use to confirm.
Setting Explanation
Off The display backlight always stays bright.
On (30sec) The backlight will dim after 30 seconds pass without operation.
87
To Next Page
Loading...
