Zoom V6 User Manual

You must read the Usage and Safety Precautions before use.
Operation Manual
Vocal Processor
© 2019 ZOOM CORPORATION
Copying or reprinting this manual in part or in whole without permission is prohibited.
Product names, registered trademarks and company names in this document are the property of their respective companies. All trademarks and regis-
tered trademarks in this document are for identification purposes only and are not intended to infringe on the copyrights of their respective owners.
Proper display is not possible on grayscale devices.

Zoom V6 Specifications

General

Type	Vocal Processor
Looper	Yes
Inputs	1 x XLR
Phantom Power	Yes
USB	Yes
Computer Connectivity	USB
Input Channels	1
Output Channels	2
Bit Depth	24-bit
Sample Rate	44.1 kHz
Headphone Output	Yes
Input	XLR
Power	9V DC
Power Source	9V DC power supply (included)
Outputs	2 x XLR

Summary

Rear Panel Connections

Audio and Power Inputs

MIC IN, EFFECT CONTROL, USB, PHONES outputs, and DC 9V AC adapter connector.

Control Switches

Power and Output

Making Connections

Microphone and Output Setup

Computer and USB Connectivity

Turning the Power On

Power On Procedure

Steps to safely turn the unit ON, including volume adjustment and power indicator.

Adjusting Volume and Tone

Mic Input Volume Adjustment

Compressor for Volume Variation

Selecting Patch Memories

Patch Memory Operation

How to store and select up to 100 patch memories containing VOICE, HARMONY, and EFFECT settings.

Using the VOICE Section

VOICE Section Controls

Activating the VOICE section and using selection/adjustment knobs for various voice effects.

VOICE Effect Types

Advanced VOICE Effects

Using the HARMONY Section

HARMONY Section Operation

Activating the HARMONY section, setting the key, and selecting harmony levels (Higher, High, etc.).

Harmony Pitch Details

Using the EFFECT Section

Effect Section Controls

Activating, selecting, and adjusting various effects like distortion, telephone, beat box, reverbs, chorus.

Effect Notes and Delay Adjustment

Saving Settings in Patch Memories

Saving Patch Memory Procedure

Step-by-step guide to saving current VOICE, HARMONY, and EFFECT settings to a patch memory.

Using the FORMANT Pedal

Formant Pedal Operation and Adjustment

How to use the FORMANT pedal to change voice character and adjust its stiffness.

Using the Looper

Looper Activation and Basic Operation

Entering looper mode, recording, playing, and stopping loops.

Loop Overdubbing and Management

Adding overdubs, stopping overdubbing, removing/restoring loops, and clearing the loop.

Making Other Settings

Standard Pitch Setting

Adjusting the standard pitch for vocal pitch correction and harmony.

Battery Type Setting

Setting the type of batteries used for accurate charge indication.

ECO Mode Setting

Configuring the automatic power-off function for energy saving.

Restoring Factory Defaults

Resetting all settings to their original factory defaults.

Updating the Firmware

Firmware Update Process

Steps to download firmware from ZOOM website and update the V6 via USB.

Troubleshooting

Power and Sound Issues

Resolving problems with unit not powering on or having no/low sound output.

Noise and Distortion Issues

Addressing noise, distortion, or odd timbre in the sound output.

Functionality Issues

Specifications

Technical Specifications Overview

Detailed technical data including section types, sampling rate, bit depth, I/O, power, dimensions, and weight.