Display
This shows the selected patch memory number and looper status.
STORE button
Press to save the current settings to a patch memory.
Input control section
Adjust the volume and tone of the input from the mic.
ENHANCE button
Turn the ENHANCE function on/off.
COMP knob
Adjust the amount of compression.
VOLUME knob
Adjust the mic input volume.
CLIP indicator
This shows the status of the input sound.
POWER indicator
This shows whether the power is on or off and the remaining battery charge.
FORMANT pedal
Change the character of the voice.
Patch memory/looper control section
Select patch memories and operate the looper.
MEMORY/LOOPER footswitch
Switch between memory and looper modes.
Press and hold to bypass the effect of the
.
MEMORY footswitch
Use to select patch memories.
When in looper mode, use to record and play loops.
MEMORY footswitch
Use to select patch memories.
When in looper mode, use to stop loops.
EFFECT section
Apply delay, reverb or another effect.
EFFECT selection knob
Select the effect.
EFFECT ADJUST knob
Adjust the effect.
EFFECT indicator
This shows whether the EFFECT section is on or off.
EFFECT footswitch
Turn the EFFECT section on/off.
8
To Next Page
Loading...
Need help?
General
