ZXHN H3601 Maintenance Management Guide
1. Click Static Routing to the configuration page, see Figure 6-18.
Figure 6-18 Static Routing Page
2. Configure the static routing parameters.Table 6-12 lists the static routing parameters.
Table 6-12 Parameter Descriptions for the Static Routing
Parameter Description
Name The name of static routing entry.
Egress WAN connection for static routing.
Network Address IPv4 address of the destination network.
Subnet Mask Subnet mask of the destination network.
Gateway The next-hop IPv4 address to the destination network.
3. Click Apply button to apply the changes.
Policy Routing
1. Click Policy Routing to the configuration page, see Figure 6-19.
6-16 SJ-20200429083356-004 | 2020-07-23(R1.0)
To Next Page
Loading...
