Zte ZXR10 5900E Series - Page 105

Chapter4IS-ISConguration
StepCommandFunction
2ZXR10(config-isis-0)#redistribute<protocol>[[level-1
|level-1-2|level-2][{[metric<metric-value>]|
with-originate-metric}][metric-type<type>][route-map
<map-tag>]]
Conguresrouteredistribution
inIS-ISroutingmode.
ForadescriptionoftheparametersinStep2,refertothefollowingtable:
ParameterDescription
<protocol>(Required)Protocolsource.Optionsareasfollows:connect,
static,rip,isis<process-id>,ospf<process-id>andbgp.Itis
mandatory.T oredistributeIS-IS/OSPFroutes,itisnecessary
tospecifytheprocessID.
level-1SetstheredistributedroutestoenterLevel-1.
level-1-2SetstheredistributedroutestoenterLevel-1andLevel-2.
level-2SetstheredistributedroutestoenterLevel-2.
with-originate-metricUsesthemetricvalueintheoriginatingroutingprotocolas
theag.
<metric-value>Metricvalue.Range:0-4261412864.
<metric-type>Whethertocarryanexternalmetricvalueofaninterval
metricvalue.
route-map<map-name>Usearoute-map.
ConguringIS-ISLoadBalancing
IS-ISsupportsloadbalancing.Loadbalancingindicatesthatmultiplelinkswiththesame
costanddestinationcansharetrafc.Loadbalancinghastwomodes:packet-basedand
ow-based.Thedefaultmodeisow-based.
TocongureIS-ISloadbalancingontheZXR105900E,performthefollowingsteps:
StepCommandFunction
1ZXR10(config)#routerisis[process-id][vrf<vrf-name>]EntersIS-ISrouteconguration
mode.
2ZXR10(config-isis-0)#maximum-paths<1-32>Conguresloadbalancingin
IS-ISroutecongurationmode.
Theparameter<1-32>
indicatestheloadbalancing
entriessupportedbythe
system.
ConguringTrafcEngineering
TheZXR105900EIS-ISIPv4supportsthepublicnetworkTEfunction.
4-21
SJ-20150114102049-003|2015-01-15(R1.0)ZTEProprietaryandCondential