Zte ZXR10 5900E Series - RIP Maintenance

ZXR105900ESeriesCongurationGuide(IPv4Routing)
StepCommandFunction
1ZXR10(config)#routerripThisentersRIPconguration
mode.
2ZXR10(config-rip)#version{1|2}ThisconguresRIPv1orRIPv2.
ThedefaultsettingisRIPv2.
TospecifytheRIPversionofpacketstobesentorreceivedbyaninterface,performthe
followingcommands.
RIPdefaultstatespeciedbyversioncommandcanbeignored.
StepCommandFunction
1ZXR10(config)#routerripThisentersRIPconguration
mode.
2ZXR10(config)#interface<interface-name>Thisentersinterface
congurationmode.
3ZXR10(config-if)#ipripreceiveversion{1|2}ThisspeciesRIPversion
(RIPv1orRIPv2)ofthepackets
tobereceivedbyaninterface.
Usedefaultsettingifversionis
notused,thatis,bothofRIPv1
andRIPv2packetsarereceived
4ZXR10(config-if)#ipripsendversion{1|2{broadcast
|multicast}}
ThisspeciesRIPversion
(RIPv1orRIPv2)ofthepackets
tobesentbyaninterface.
Descriptionsoftheparametersusedbystep4areshownbelow.
ParameterDescription
1TheinterfaceonlysendsRIPv1packets
2TheinterfaceonlysendsRIPv2packets.Here,broadcastormulticastmodecan
beselected.
broadcastTheinterfacesendcompatiblepacketstobroadcastaddress.Allofroutesarenatural
networks,andnosupernettingroute.
multicastTheinterfacesendsRIPv2packetstomulticastaddress.Byusingauto-summary,
subnetworkroutecanbesent.
2.3RIPMaintenance
TomaintainRIPonZXR105900E,usethefollowingcommands.
2-8
SJ-20150114102049-003|2015-01-15(R1.0)ZTEProprietaryandCondential