Zte ZXR10 5900E Series - Page 25

Chapter2RIPConguration
CommandFunction
ZXR10(config)#showiprip[vrf<vrf-name>]Thisshowsthebasicinformation
ofRIPrunning.
ZXR10(config)#showipripinterface[vrf<vrf-name>]<interface-
name>
Thisshowsthecurrent
congurationandstateofa
RIPinterface.
ZXR10(config)#showipripdatabase[vrf<vrf-name>][network
<ip-address>[mask<net-mask>]]
Thisshowstherouteentries
generatedbyRIP.
ZXR10(config)#showipripnetworks[vrf<vrf-name>]ThisshowsinformationofallRIP
interfaces.
Descriptionsoftheparametersusedbycommandsareshownbelow.
ParameterDescription
vrf<vrf-name>VRFname,thelengthis1-32characters.
network<ip-address>NetworkIPaddress,indotteddecimalnotation.
mask<net-mask>Networkmask,indotteddecimalnotation
<interface-name>NameofRIPinterface
Thisexampleshowswhatwillbedisplayedaftershowipripisused.
ZXR10#showiprip
routerrip
auto-summary
default-metric1
distance120
validate-update-source
version2
flash-update-threshold5
maximum-paths1
output-delay5100
timersbasic30180180240
network
10.0.0.00.255.255.255
Descriptionsofcommandoutputareshownbelow.
2-9
SJ-20150114102049-003|2015-01-15(R1.0)ZTEProprietaryandCondential