Zte ZXR10 5900E Series - Ethernet OAM Configuration

Chapter4IS-ISConguration
StepCommandFunction
3ZXR10(config-isis-0)#restartt2-timer<t2-interval>[lev
el-1|level-2]
Setsadatabase
synchronizationtimerfor
thegracefulrestartfunction.
4ZXR10(config-isis-0)#restartt3-timer{adjacency|
manual<t3-interval>}
Setsacompletiontimerforthe
gracefulrestartfunction.
5ZXR10(config-isis-0)#interface<interface-name>EntersIS-ISinterface
congurationmode.
6ZXR10(config-isis-0-if-vlan100)#restart{t1-retry
<retry-timers>[level-1|level-2]}|{t1-timer<interval>[level-1
|level-2]}
Setstheretrytimesoft1
timer.Forbroadcastlinks,
iftherouterisselectedasa
DISrouter,andthiscommand
isrunontheinterface,you
arerecommendedtorunthe
hello-multipliercommandto
increasethehello-multiplier
value.
ForadescriptionoftheparametersinStep6,refertothefollowingtable:
ParameterDescription
t1-retryNumberoftimesthatt1timerisreset.
t1-timerTimesetbyt1timer.
<retry-timers>Numberoftimesthatt1timercanbereset.Default:3.
<interval>Interval(second).Range:1-65535,default:3.
level-1TherouterisintheLevel-1area.
level-2TherouterisintheLevel-2area.
4.3MaintainingtheIS-ISProtocol
TomaintaintheIS-ISprotocolontheZXR105900E,runthefollowingcommands:
CommandFunction
ZXR10#showisisadjacency[up-time][level-1|level-2][process-id
<process-id>]
Displaystheadjacencyrelations
andthestatusofcurrent
neighbors.
ZXR10#showisiscircuits[detail][process-id]showisiscircuits
[detail][process-id<process-id>]
Displaystheinformationaboutthe
IS-ISinterface.
ZXR10#showisisdatabase[LSP-ID][level-1|level-2][verbose][de
tail][process-id<process-id>]
Displaystheinformationaboutan
IS-ISneighbor.
4-23
SJ-20150114102049-003|2015-01-15(R1.0)ZTEProprietaryandCondential