Zte ZXR10 5900E Series - Page 21

Chapter2RIPConguration
Thefollowingarethecongurationeffects:
lTheintervalforsendingRIPupdateis5seconds.
lThePeriodbeforeroutebecomesinvalidis5seconds.
lRouterhas15secondsforwaitingafterentersblockedstate.
lThereare30secondsforwaitingfromtherouteentrybecominginvalidtoclearingthe
routeentry.
lThereare10msintervalforsendingeach500packets.
ConguringRIPEnhancedFunctions
TocongureRIPenhancedfunctiononZXR105900E,performthefollowingsteps.
1.ConguringRIPneighbor
StepCommandFunction
1ZXR10(config)#routerripThisentersRIPconguration
mode.
2ZXR10(config-rip)#neighbor<ip-address>Thiscommandappliesto
non-broadcastlink.
Thisdenesneighborrouterto
exchangeroutinginformation
withtherouter.
Thereare255neighborscan
befoundandcongured.
Byusingthiscommand,RIProutinginformationcanbeexchangedbypoint-to-point
method(non-broadcast).Oncetheneighborisdesignated,theinterfaceswhich
belongtothesamenetworkwiththerouterwillnotusebroadcasting(ormulticast)to
exchangeRIProutinginformation.
2.ConguringRIPauthentication
RIPv2supportsplaintextandMD5authenticationmodes.Passwordiscongured
oninterfaces.Networkneighborshavetousethesameauthenticationmodeand
password.RIPv1doesnotsupportauthentication.
TocongureRIPpacketplaintextauthenticationmode,performthefollowingsteps.
StepCommandFunction
1ZXR10(config)#routerripThisentersRIPconguration
mode.
2ZXR10(config)#interface<interface-name>Thisentersinterface
congurationmode.
3ZXR10(config-if)#ipripauthenticationmodetextThisspeciestheinterfaceto
authenticateRIPpacketsby
plaintextmode.
2-5
SJ-20150114102049-003|2015-01-15(R1.0)ZTEProprietaryandCondential