Zte ZXR10 5900E Series - STP Configuration Examples

Chapter3OSPFConguration
InternetAddress30.0.1.1255.255.255.252enable
Upfor00:09:38
Inthearea0.0.0.1BDR
Cost1,Priority1,NetworkTypebroadcast
TransmitDelay(sec)1,AuthenticationTypemessage-digest
......
ConguringanOSPFStubArea
TocongureanOSPFstubarea,thefollowingconditionsarerequired:TheOSPFprotocol
isrunonrouters,andtheareatobeconguredisanon-backbonearea.
TocongureanOSPFstubareaontheZXR105900E,performthefollowingsteps:
StepCommandFunction
1ZXR10(config)#routerospf<process-id>[vrf<vrf-name>]Entersrouteconguration
mode.
2ZXR10(config-ospfv2)#area<area-id>stub[default-cost
<cost>]
Setsanareatoastubarea.
3ZXR10(config-ospfv2)#area<area-id>stubno-summary
[default-cost<cost>]
ConguresABRnottointroduce
anytype-3routetoastubarea.
Inastubarea,onlyonedefault
type-3routeissupported.
ForadescriptionoftheparametersinStep3,refertothefollowingtable:
ParameterDescription
no-summarySummaryrouteinformationisforbiddentobesenttoastub
area.
default-cost<cost>Costofthedefaultrouteadvertisedtoastubarea.Range:
0-65535.
CongurationExample
Setarea1toastubarea,seeFigure3-5.
RouterIDsarelistedbelow.
DeviceRouterID
S11.1.1.2
S21.1.1.3
S31.1.1.4
3-17
SJ-20150114102049-003|2015-01-15(R1.0)ZTEProprietaryandCondential