Chapter 1 Command Line Interface
ZyWALL (ZLD) CLI Reference Guide
17
Figure 5 Web Console: Connecting
Then, the Password screen appears.
Figure 6 Web Console: Password
6 Enter the password for the user name you specified earlier, and click OK. If you enter
the password incorrectly, you get an error message, and you may have to close the
console window and open it again. If you enter the password correctly, the console
screen appears.
Figure 7 Web Console
7 To use most commands in this User’s Guide, enter configure terminal. The prompt
should change to
Router(config)#.
1.2.3 Telnet
Use the following steps to Telnet into your ZyWALL.
To Next Page
Loading...
