ZyXEL Communications 1050 - Aaa Group Server Command Example; Aaa Group Server Radius Commands

Chapter 27 AAA Server
ZyWALL (ZLD) CLI Reference Guide
192
27.2.7 aaa group server radius Commands
The following table lists the aaa group server radius commands you use to configure
a group of RADIUS servers.
27.2.8 aaa group server Command Example
The following example creates a RADIUS server group with two members and sets the secret
key to “12345678” and the timeout to 100 seconds.
Table 116 aaa group server radius Commands
COMMAND DESCRIPTION
clear aaa group server radius
group-name
Deletes all RADIUS server groups or the specified
RADIUS server group.
Note: You can NOT delete a server group
that is currently in use.
show aaa group server radius
group-name
Displays the specified RADIUS server group settings.
[no] aaa group server radius
group-name
Sets a descriptive name for the RADIUS server group.
The
no command deletes the specified server group.
aaa group server radius rename
{group-name-old} group-name-new
Sets the server group name.
aaa group server radius group-name
[no] server host
radius_server
Sets the RADIUS server address. Enter the IP address
(in dotted decimal notation) or the domain name of a
RADIUS server to add to this server group. The no
command clears this setting.
[no] server key secret Sets a password (up to 15 alphanumeric characters)
as the key to be shared between the RADIUS
server(s) and the ZyWALL. The
no command clears
this setting.
[no] server timeout time Sets the search timeout period (in seconds). Enter a
number between 1 and 300. The no command clears
this setting and set this to the default setting of 5
seconds.
Router# configure terminal
Router(config)# aaa group server radius RADIUSGroup1
Router(group-server-radius)# server host 192.168.1.100 auth-port 1812
Router(group-server-radius)# server host 172.23.22.100 auth-port 1812
Router(group-server-radius)# server key 12345678
Router(group-server-radius)# server timeout 100
Router(group-server-radius)# exit
Router(config)# show aaa group server radius
No. Name Reference
==========================================================================
1 RADIUSGroup1 0
Router(config)#