Chapter 4 Registration
ZyWALL (ZLD) CLI Reference Guide
39
4.2.1 Command Examples
The following commands allow you to register your device with an existing account or create
a new account and register the device at one time, and activate a trial service subscription.
The following command displays the account information and whether the device is
registered.
The following command displays the service registration status and type and how many days
remain before the service expires.
service-register checkexpire Gets information of all service subscriptions from
myZyXEL.com and updates the status table.
service-register service-type standard license-
key key_value
Activates a standard service subscription with the
license key.
service-register service-type trial service
{all|content-filter|idp|av}
Activates the trial service subscription(s).
show device-register status Displays whether the device is registered and
account information.
show service-register status {all|content-
filter|idp|sslvpn|av}
Displays service license information.
Table 8 Command Summary: Registration (continued)
COMMAND DESCRIPTION
Router# configure terminal
Router(config)# device-register username alexctsui password 123456
Router(config)# service-register service-type trial service content-filter
Router# configure terminal
Router(config)# show device-register status
username : alexctsui
password : 123456
device register status : yes
expiration self check : no
Router# configure terminal
Router(config)# show service-register status all
Service Status Type Count Expiration
===========================================================================
IDP Signature Licensed Standard N/A 176
Anti-Virus Not Licensed None N/A 0
SSLVPN Not Licensed None 5 N/A
Content-Filter Not Licensed None N/A 0
To Next Page
Loading...
