Chapter 33 System Remote Management
ZyWALL (ZLD) CLI Reference Guide
223
33.10.1.1 Vantage CNM Command Examples
The following example turns on Vantage CNM management and sets the ZyWALL to register
with a server at https://1.2.3.4/vantage/TR069.
33.11 Language Commands
Use the language commands to display what language the web configurator is using or
change it.
You must use the configure terminal command to enter the configuration
mode before you can use these commands.
Router# configure terminal
Router(config)# cnm-agent activate
Router(config)# cnm-agent manager https://1.2.3.4/vantage/TR069
Router(config)# show cnm-agent configuration
Activate: YES
ACS URL: https://1.2.3.4/vantage/TR069
Keepalive: ENABLE
Keepalive Interval: 60
Periodic Inform: DISABLE
Periodic Inform Interval: 3600
Custom IP: NO
HTTPS Authentication: NO
Vantage Certificate: zw1050.cer456
Table 137 Command Summary: Language
COMMAND DESCRIPTION
language <English |
Simplified_Chinese |
Traditional_Chinese>
Specifies the language used in the web configurator
screens.
show language {setting | all} setting displays the current display language in the web
configurator screens.
all displays the available languages.
To Next Page
Loading...
