ZyWALL (ZLD) CLI Reference Guide
255
CHAPTER 38
Diagnostics
This chapter covers how to use the diagnostics feature.
38.1 Diagnostics
The diagnostics feature provides an easy way for you to generate a file containing the
ZyWALL’s configuration and diagnostic information. You may need to generate this file and
send it to customer support during troubleshooting.
38.2 Diagnosis Commands
The following table lists the commands that you can use to have the ZyWALL collect
diagnostics information. Use the
configure terminal command to enter the configuration
mode to be able to use these commands.
38.3 Diagnosis Commands Example
The following example creates a diagnostic file and displays its name, size, and creation date.
Table 152 diagnosis Commands
COMMAND DESCRIPTION
diag-info collect Has the ZyWALL create a new diagnostic file.
show diag-info Displays the name, size, and creation date (in yyyy-mm-dd hh:mm:ss format) of the
diagnostic file.
Router# configure terminal
Router(config)# diag-info collect
Please wait, collecting information
Router(config)# show diag-info
Filename : diaginfo-20070423.tar.bz2
File size : 1259 KB
Date : 2007-04-23 09:55:09
To Next Page
Loading...
