ZyXEL Communications 1050 - Schedule Command Examples

Chapter 26 Schedules
ZyWALL (ZLD) CLI Reference Guide
186
The following table lists the schedule commands.
26.2.1 Schedule Command Examples
The following commands create recurring schedule SCHEDULE1 and one-time schedule
SCHEDULE2 and then delete SCHEDULE1.
Table 110 schedule Commands
COMMAND DESCRIPTION
show schedule-object Displays information about the schedules in the
ZyWALL.
no schedule-object object_name Deletes the schedule object.
schedule-object object_name date time date
time
Creates or updates a one-time schedule.
date: yyyy-mm-dd date format; yyyy-<01..12>-
<01..31>
schedule-object object_name time time [day]
[day] [day] [day] [day] [day] [day]
Creates or updates a recurring schedule.
day: 3-character day of the week; sun | mon | tue |
wed | thu | fri | sat
Router# configure terminal
Router(config)# schedule-object SCHEDULE1 11:00 12:00 mon tue wed thu fri
Router(config)# schedule-object SCHEDULE2 2006-07-29 11:00 2006-07-31 12:00
Router(config)# show schedule-object
Object name Type Start/End Ref.
===========================================================================
SCHEDULE1 Recurring 11:00/12:00 ===MonTueWedThuFri=== 0
SCHEDULE2 Once 2006-07-29 11:00/2006-07-31 12:00 0
Router(config)# no schedule-object SCHEDULE1
Router(config)# show schedule-object
Object name Type Start/End Ref.
===========================================================================
SCHEDULE2 Once 2006-07-29 11:00/2006-07-31 12:00 0