Chapter 1 Command Line Interface
ZyWALL (ZLD) CLI Reference Guide
21
See Chapter 23 on page 171 for more information about the user types. User users can only
log in, look at (but not run) the available commands in User mode, and log out. Limited-
Admin users can look at the configuration in the web configurator and CLI, and they can run
basic diagnostics in the CLI. Admin users can configure the ZyWALL in the web configurator
or CLI.
At the time of writing, there is not much difference between User and Privilege mode for
admin users. This is reserved for future use.
1.6 Shortcuts and Help
1.6.1 List of Available Commands
A list of valid commands can be found by typing ? or [TAB] at the command prompt. To view a
list of available commands within a command group, enter
<command> ? or <command>
[TAB].
Figure 9 Help: Available Commands Example 1
Figure 10 Help: Available Command Example 2
1.6.2 List of Sub-commands or Required User Input
To view detailed help information for a command, enter <command> <sub command> ?.
Router> ?
apply
clear
configure
copy
delete
------------------[Snip]--------------------
run
setenv
show
traceroute
write
Router>
Router> show ?
aaa
account
address-object
alg
------------------[Snip]--------------------
username
users
version
vrrp
zone
Router> show
To Next Page
Loading...
