ZyXEL Communications 1050 - Learned Routing Information Commands

Chapter 8 Routing Protocol
ZyWALL (ZLD) CLI Reference Guide
78
8.2.5 Learned Routing Information Commands
This table lists the commands to look at learned routing information.
[no] area IP virtual-link IP
authentication message-digest
Enables MD5 authentication in the specified virtual
link. The
no command disables authentication in
the specified virtual link.
[no] area IP virtual-link IP
authentication authentication-key authkey
Sets the password for text authentication in the
specified virtual link. The no command clears the
password in the specified virtual link.
[no] area IP virtual-link IP
authentication message-digest-key <1..255>
md5 authkey
Sets the MD5 ID and password for MD5
authentication in the specified virtual link. The
no
command clears the MD5 ID and password in the
specified virtual link.
[no] area IP virtual-link IP
authentication same-as-area
Sets the virtual link’s authentication method to the
area’s default authentication.
[no] area IP virtual-link IP
authentication-key authkey
Sets the password for text authentication in the
specified virtual link. The
no command clears the
password.
area IP virtual-link IP message-digest-key
<1..255> md5 authkey
Sets the MD5 ID and password for MD5
authentication in the specified virtual link.
no area IP virtual-link IP message-digest-
key <1..255>
Clears the MD5 ID in the specified virtual link.
Table 38 router Commands: Virtual Links in OSPF Areas (continued)
COMMAND DESCRIPTION
Table 39 ip route Commands: Learned Routing Information
COMMAND DESCRIPTION
show ip route [kernel | connected | static |
ospf | rip | bgp]
Displays learned routing and other routing
information.