ZyXEL Communications 1050 - Page 96

Chapter 14 Firewall
ZyWALL (ZLD) CLI Reference Guide
96
firewall zone_object {zone_object|ZyWALL} delete
<1..5000>
Removes a direction specific through-
ZyWALL rule or to-ZyWALL rule.
<1..5000>: the index number in a direction
specific firewall rule list.
firewall zone_object {zone_object|ZyWALL} flush Removes all direction specific through-
ZyWALL rule or to-ZyWALL rules.
firewall zone_object {zone_object|ZyWALL} insert
<1..5000>
Enters the firewall sub-command mode to add
a direction specific through-ZyWALL rule or
to-ZyWALL rule before the specified rule
number.
<1..5000>: the index number in a direction
specific firewall rule list.
firewall zone_object {zone_object|ZyWALL} move
<1..5000> to <1..5000>
Moves a direction specific through-ZyWALL
rule or to-ZyWALL rule to the number that you
specified.
<1..5000>: the index number in a direction
specific firewall rule list.
[no] firewall activate Enables the firewall on the ZyWALL. The
no
command disables the firewall.
firewall append Enters the firewall sub-command mode to add
a global firewall rule to the end of the global
rule list.
firewall delete <1..5000> Removes a firewall rule.
<1..5000>: the priority number of a firewall
rule.
firewall flush Removes all firewall rules.
firewall insert <1..5000> Enters the firewall sub-command mode to add
a firewall rule before the specified rule
number.
<1..5000>: the priority number of a firewall
rule.
firewall move <1..5000> to <1..5000> Moves a firewall rule to the number that you
specified.
<1..5000>: the priority number of a firewall
rule.
show connlimit max-per-host Displays the highest number of sessions that
the ZyWALL will permit a host to have at one
time.
show firewall Displays all firewall settings.
show firewall <1..5000> Displays a firewall rule’s settings.
<1..5000>: the priority number of a firewall
rule.
show firewall zone_object {zone_object|ZyWALL} Displays all firewall rules settings for the
specified packet direction.
show firewall zone_object {zone_object|ZyWALL}
<1..5000>
Displays a specified firewall rule’s settings for
the specified packet direction.
<1..5000>: the index number in a direction
specific firewall rule list.
show firewall status Displays whether the firewall is active or not.
Table 50 Command Summary: Firewall (continued)
COMMAND DESCRIPTION