ZyXEL Communications GS1500-24P - Storm Control Setting

Chapter 19 Storm Control
GS1500-24P User’s Guide
138
19.3 Storm Control Setting
Click Security > Storm Control in the navigation panel to display the screen as
shown next.
Figure 67 Security > Storm Control
The following table describes the labels in this screen.
Table 47 Security > Storm Control
LABEL DESCRIPTION
Storm Type Select the type of packets to be limited with the Storm Control feature.
The types are Broadcast, Multicast, Unknown Unicast or Unknown
Multicast.
Port Select the port(s) which will use storm control.
State Select On to enable traffic storm control on the Switch. Select Off to
disable this feature.
Rate (pps) Type a packets per second (pps) rate of between 0 to 1000000. This is
the maximum amount of packets of the type selected previously that are
allowed to be transferred to the Switch per second. Any subsequent
packets are discarded.
Apply Click Apply to save your changes to the Switch.
Port This field displays the port number.
Broadcast
(pps)
This field displays how many broadcast packets the port can receive per
second.
Multicast (pps) This field displays how many multicast packets the port can receive per
second.
Unknown
Unicast (pps)
This field displays how many unknown unicast packets the port can
receive per second.
Unknown
Multicast (pps)
This field displays how many unknown multicast packets the port can
receive per second.