Chapter 21 Monitoring
GS1500-24P User’s Guide
146
The following table describes the labels in this screen.
Table 50 Monitoring > Logging > Logging Viewing
LABEL DESCRIPTION
Tar get Se lec t RAM to display only the logs stored in the RAM.
Select Flash to display only the logs stored in the Flash memory.
Level Select the severity level(s) of the log entries you want to display. The
possible severity levels are:
• Error - to record system failures, such as events which will cause the
Switch to malfunction and events such as invalid user input in the web
configurator.
• Warning - to record non critical errors on the Switch. The Switch will
continue to function when warnings are recorded.
• Info - to record regular system events, such as configuration changes
or logins.
• Debug - to record events which can be helpful for engineering
debugging of the Switch’s function. This field is not recommended to
track as it creates many messages not helpful to typical users.
Category Select the category of the log entry you want to display. The categories
are based on software and hardware features of the Switch. For
example the category MIRROR records events which deal with the Port
Mirroring features you set up and the category SYSTEM records events
which deal with the overall operation of the Switch.
View Click the View button to display the logs according the criteria specified
in the fields above.
Number This is the index number for the log entry.
Level This field displays the severity level of the log entry.
Category This field displays what category the log entry fits into.
Time This field specifies the time when the Switch recorded the log event. The
Switch resets its internal clock when it is restarted.
Message This field displays an explanation for the log entry.
To Next Page
Loading...
