ZyXEL Communications GS1500-24P - Page 150

Chapter 22 Tools
GS1500-24P User’s Guide
150
Note: You must set up a TFTP server in the same subnet of the Switch to use the
TFTP features.
Figure 72 Tools > TFTP
The following table describes the labels in this screen.
Table 52 Tools > TFTP
LABEL DESCRIPTION
TFTP Backup Configuration
TFTP Server
IP Address
Type the IP address of the TFTP server where you want to backup the
current Switch configuration.
Configuratio
n File Name
Type a file name you want to save the Switch configuration as. This cannot
be a path.
Backup Click Backup to save the configuration file to the TFTP server specified.
TFTP Restore Configuration
TFTP Server
IP Address
Type the IP address of the TFTP server which has the Switch configuration
you want to restore.
Configuratio
n File Name
Type the file name of the configuration you want to restore. This cannot be a
path. The file must be in the root directory of the TFTP server.
Restore Click Restore to change the Switch’s configuration file to the one on the
TFTP server specified.
TFTP Download Image
TFTP Server
IP Address
Type the IP address of the TFTP server which has the Switch firmware file
you want to upgrade/downgrade to.
Image File
Name
Type the file name of the firmware file to install. This cannot be a path. The
file must be in the root directory of the TFTP server.
Download
Image
Click Download to download the file specified above and install the new
firmware.