Chapter 3 Hardware Panels
GS1500-24P User’s Guide
34
5 Connect the fiber optic cables to the transceiver.
Figure 8 Transceiver Installation Example
Figure 9 Connecting the Fiber Optic Cables
3.2.2.2 Transceiver Removal
Use the following steps to remove a mini-GBIC transceiver (SFP module).
1 Remove the fiber optic cables from the transceiver.
2 Open the transceiver’s latch (latch styles vary).
3 Pull the transceiver out of the slot.
Figure 10 Removing the Fiber Optic Cables
Figure 11 Opening the Transceiver’s Latch Example
Figure 12 Transceiver Removal Example
To Next Page
Loading...
