Chapter 7 Link Aggregation
GS1500-24P User’s Guide
61
The following table describes the labels in this screen.
Table 10 Configuration > Link Aggregation > Trunk Group Setting
LABEL DESCRIPTION
Group ID Select the group ID This field displays the group ID to identify a trunk
group, that is, one logical link containing multiple ports.
Type Selec t Static if the ports are to be configured as static members of a trunk
group.
Select LACP if the ports are to be configured to join a trunk group via
LACP.
Ports Select the ports to be added to the trunk group.
LACP Active Select the LACP active ports to be added to the trunk group. This field is
active when LACP is selected as the Type.
Add / Modify Click Add / Modify to save your changes to the Switch.
Group ID This field displays the group ID to identify a trunk group, that is, one
logical link containing multiple ports.
Type This field displays Static if the ports are configured as static members of
the trunk group.
This field displays LACP if the ports are configured to be part of the trunk
group via LACP.
Ports This field displays the ports that are part of the trunk group.
LACP Active/
Passive
The first number in this field displays the number of ports that have LACP
activated. The second number displays the number of ports that do not
have LACP activated.
Select Select the check box for a trunk group setting and click Delete to remove
all settings from the selected trunk group.
Delete Click Delete to remove any selected trunk groups.
Select All Click Select All to select all trunk group settings.
To Next Page
Loading...
