Chapter 9 Spanning Tree Protocol
GS1500-24P User’s Guide
78
P2P Select True when the port is connected to one bridge as a Point-to-
Point link type.
Select False when the port is connected to multiple bridges as a Shared
Medium link type.
Select Auto to have the Switch automatically determine the link type.
Edge Select True when the port is connected to an end node (a computer
network card for example).
Select False when the port is connected to a bridge node.
Apply Click Apply to save your changes to the Switch.
Port This field displays the port number.
State This field displays the port states. See Section 9.3.3 on page 74.
Role This field displays the role of the port in the network topology.
Path Cost Config displays the Path Cost setting you have configured for the port.
Actual displays the Path Cost setting currently in use.
Priority This field displays the port’s priority.
P2P Config displays the P2P setting you have configured for the port.
Actual displays the P2P setting currently in use.
Edge Config displays the Edge setting you have configured for the port.
Actual displays the Edge setting currently in use.
Table 18 Configuration > Spanning Tree Protocol > STP Port Setting (continued)
LABEL DESCRIPTION
To Next Page
Loading...
