Chapter 10 QoS
GS1500-24P User’s Guide
84
Click Configuration > QoS > Policy-based Priority to display the screen as
shown next.
Note: Policy-based priority has a higher priority over both port-based and DSCP-
based priority.
Note: When two policy-based rules conflict with each other, a higher layer rule has
priority over lower layer rule.
Figure 39 Configuration > QoS > Policy-based Priority
The following table describes the labels in this screen.
Table 22 Configuration > QoS > Policy-based Priority
LABEL DESCRIPTION
No. This field displays the index number of the policy.
Name This field displays the descriptive name for the policy. This is for identification
purpose only.
Modify Click the Modify button to edit the policy.
Delete Select the checkbox for the policy you want to delete.
Add Click Add to configure a new policy-based priority rule.
Select
All
Click Select All to select all the entries in the table.
Delete Click Delete to remove any selected entries from the table.
To Next Page
Loading...
